Twenty-two rounds: four charge weights, five rounds each, two slots left over for foulers. That's a complete ladder in one box. Label the lid with a silver paint marker or a strip of painter's tape, and three weeks later the box still knows what you did.
The RF22-LM is MTM's large-magnum flip-top, cut deep for the cartridges that don't fit anything else. Clear Smoke translucent — you can see a box is loaded without opening it.
Documented to fit: 26, 28, 30 and 33 Nosler. 300 PRC. 338 Lapua Magnum. 300 and 338 Norma Magnum. 416 Remington Magnum. 416 Rigby. 404 Jeffery. 300, 375, 378 and 6.5-300 Weatherby Magnum. 300, 338, 375 and 7mm Remington Ultra Magnum. 333 and 500 Jeffery. 375 and 416 Dakota. 450/400 Nitro Express 3". 40-65 Sharps Straight. 30 Super Flanged. 7.21 Firebird, 7.62 and 7.82 Lazzeroni Warbird, 10.57 Meteor.
Also seats most of the belted magnum family — 300 Winchester Magnum, 7mm Remington Magnum, 338 Winchester Magnum, 375 H&H, 375 Ruger, 458 Lott, 340 and 270 Weatherby, the WSM cartridges. Measure your loaded round: under 3.84 inches overall and .66 inches at the head and it will seat.
Hard-sided also solves a travel problem. Airlines and the TSA want checked ammunition in its original packaging or in a fiber, wood, plastic, or metal box built to carry ammunition. This is that box. Check quantity limits with your carrier before you fly.
Injection-molded polypropylene from MTM's plant in Dayton, Ohio. Full-length hinged lid with a snap-lock latch. Won't warp, crack, chip, peel, expand, or contract. And should the twenty-two slots end up holding drill bits, streamer flies, or your wife's lipsticks instead, the polypropylene won't object.
- Model: RF22-LM (Large Magnum)
- Color: Clear Smoke
- Capacity: 22 rounds
- Count: 1
- Maximum Cartridge OAL: 3.84"
- Slot Dimensions: .66" square × 3.84" deep
- Material: Polypropylene
- Closure: Flip-top, full-length hinged lid with snap-lock latch
- Stacking: Not interlocking
- Marking: Silver or white oil-based paint marker recommended; wax/grease pencil will not adhere to polypropylene
- Origin: Made in USA — Dayton, Ohio
- Application: Load development / match and competition ammunition storage / travel and safari transport
- CA Prop 65: Warning applies
